What would Wayne (Green) do?

Share

 

Hello everybody and welcome back to Everything Hamradio. Over the past few months, I have posted the monthly column that is published by Dan, KB6NU. Somehow I totally missed this month’s post until I was going through my email this morning so here it is…


 

By Dan Romanchik, KB6NU

Wayne Green was a crackpot…but he was a great one.

For those of you who aren’t as old as I am, Wayne Green, W2NSD, was not only the publisher of 73 Magazine, but also the founder of Byte and other PC magazines in the early days of personal computing. In 73, he would write these long, rambling editorials. Often, he would take the ARRL to task, criticizing what he thought to be some lunk-headed policy or another.

Just as often, he’d be encouraging hams to take up some new technology. He was, for example, one of the guys driving hams to set up repeater systems.

He would often exhort hams to get started in their own technology-related business. I remember one column where he urged hams to get involved in the home-security business. And, of course, when personal computers became popular, he wrote that hams should think about getting into that business. His reasoning was that our knowledge of electronics would stand us in good stead in those businesses.

Today, I think that he would be telling us to get more involved in with technologies like the Internet of Things, WiFi, or whatever other wireless technology is coming down the pike. “Wireless” is the key word here. These networking technologies are based on good, old radio, and who better to push these technologies forward than guys like us who understand radio.

This point was brought home to me last week as I was interviewing an executive of a wireless company for an article that I’m writing. He said to me that many of the companies he works with are taking a software-centric view to their wireless products. They simply use the reference designs provided by the wireless chip makers and expect those designs to work flawlessly in their products.

While they often do, he gave me an example where simply using the reference design was a colossal failure. In one case, he said, the company mounted the board inside a metal enclosure. Since the antenna was part of the printed-circuit board, the enclosure acted like a shield, and of course, the device had little or no range.

He went on to say that he thought that there was a real shortage of experienced RF guys in the wireless industry. Does that sound like an opportunity to you? It does to me. So, I’m going to make like Wayne Green here and exhort all you guys to get out there and take advantage of it.

This is not only a business opportunity, but a way for amateur radio operators to fulfill a couple of the “purposes” of amateur radio, as set forth in Part 97.1 of the amateur radio regulations. Part 97.1(b) says that one of the purposes of the Amateur Radio Service is “Continuation and extension of the amateur’s proven ability to contribute to the advancement of the radio art.” According to Part 97.1(d), another purpose of the Amateur Radio Service is “Expansion of the existing reservoir within the amateur radio service of trained operators, technicians, and electronics experts.”

Let’s do it!


Thanks for stopping by today. If you have not done so already, please subscribe to my site to receive emails on when I publish a new post. Also like me on Facebook and follow me on Twitter. Links to these and all the other social media pages that I have can be found on the menu at the top of the page under Social. Only a few days left until the launch of my new podcast. The Everything Hamradio podcast is scheduled to launch on January 19th.

Until next time…

73 de Curtis, K5CLM

 

Related posts